All issues

Search results

whb.axis.X.jog-counts increments but axis does not move (Teleop mode, LinuxCNC 2.9.10)

Status: Open.

#4542 In LinuxCNC/linuxcnc;

· rimoneeng-creator opened on Sep 14, 2026

Regression: Jerk/Motion issue (#3773) reappeared in 2.10 dev (PLANNER_TYPE = 0)

Status: Open.

#4539 In LinuxCNC/linuxcnc;

· thomam04 opened on Sep 14, 2026

Test fails but doesn't fail as expected (tests/interp/m98m99/12-M99-endless-main-program changed output)

Status: Open.

#4537 In LinuxCNC/linuxcnc;

· BsAtHome opened on Sep 14, 2026

Deprecate [EMCIO]DB_PROGRAM: unify tool data on one interface

Status: Open.

#4535 In LinuxCNC/linuxcnc;

· grandixximo opened on Sep 14, 2026

2.9.10 - Spindle remains running on exit of linuxcnc if using MB2HAL RS485

Status: Open.

#4529 In LinuxCNC/linuxcnc;

· rodw-au opened on Sep 13, 2026

Horizontal Drilling using G81

Status: Open.

#4528 In LinuxCNC/linuxcnc;

· rene-dev opened on Sep 13, 2026

HOME_OFFSET is doing double duty

Status: Open.

#4527 In LinuxCNC/linuxcnc;

· grandixximo opened on Sep 13, 2026

hm2_eth read timeout

Status: Open.

#4525 In LinuxCNC/linuxcnc;

· rene-dev opened on Sep 13, 2026

Remove Tcl from sample configs

Status: Open.

#4524 In LinuxCNC/linuxcnc;

· BsAtHome opened on Sep 13, 2026

PYOPENGL_PLATFORM=glx must be set if using Wayland (pncconf)

Status: Open.

#4522 In LinuxCNC/linuxcnc;

· NTULINUX opened on Sep 13, 2026

rendering of the tool faces

Status: Open.

#4508 In LinuxCNC/linuxcnc;

· grandixximo opened on Sep 8, 2026

feature: multi-channel output & sparse output for halsampler

Status: Open.

#4484 In LinuxCNC/linuxcnc;

· dirkx opened on Aug 28, 2026