Add 1209/C8C8 Custom Keypad Board

[RE-TikaRa]

Requesting PID 0x1209/0xC8C8 for a self-made macro keypad controller based on STM32F103C8T6 (16 keys, dual EC11 encoders, 5-way toggle switch). Firmware is open source (Apache-2.0), hardware is open source (CERN-OHL-S-2.0). Repo: https://github.com/RE-TikaRa/CUSTOM-KEYPAD-BOARD

[cnlohr]

@RE-TikaRa I recommend adding a picture and/or a PDF schematic of your hardware for this project.

Apart from that, the project does include all hardware sources (altium) and software under open source licenses.

I recommend merging this project.

✅️

[RE-TikaRa]

@RE-TikaRa I recommend adding a picture and/or a PDF schematic of your hardware for this project.

Apart from that, the project does include all hardware sources (altium) and software under open source licenses.

I recommend merging this project.

✅️

Thanks for the review and the recommendation!

I will add a photo of the hardware and a PDF schematic to the repository shortly. I appreciate the support for merging this project.

[cnlohr]

Still have to wait for the original maintainers to give me the magic powers, but when they do!